MK-Copper 

509,29 EUR / 100 kg
status: 25.08.2016

 

High-Current-Bolt-Contacts 1.000 up to 12.000 Ampere

One alternative to our Finger- and Plate-Contacts are Bolt-Contacts. A very robust brass casted skeleton is the basis. Current transfer to product rail follows via single spring seated Cu contact-bolts. In standard version the contact-bolts are silver plated and per customer request also available with a hard silver contact-plate soldered.

For a sufficient contact between bolts and casted skeleton a MC-contact-lamella made from silver plated Beryllium takes care. Maintenance and replacement is possible from outside the block without moving the block.

High-current bolt-contacts can be assembled direct to the rail. Additionally the design has up to 5.000 Ampere casted connection flags for current-bands as a standard.

Per your request the contacts can be manufactured without connection-flags. To keep final assembly easy, both halves are pre-assembled and adjusted to rail- thickness. For rail thickness above 10 mm we use a Cu distance block.

Bolt-Contacs

1000 1600 2000 3000 3500 4000 4500 5000 reset
40 – 60 80 – 120 reset
2 4 6 8 10 12 14 16 reset
Current in Ampere For Rail Height in mm Number Contact Bolts Number of Bolt Lines L for Rail10 in mm B Without Flags in mm H in mm Height in mm Part Number order request
1000 40 – 60 2 1 200 45 150 40 8701001 order request
1000 80 – 120 2 1 200 45 205 40 8701002 order request
1600 40 – 60 4 1 200 90 150 40 8701601 order request
1600 80 – 120 4 2 200 45 205 40 8701602 order request
2000 80 – 120 6 2 200 90 205 40 8702000 order request
3000 80 – 120 8 2 200 90 205 40 8703000 order request
3500 80 – 120 10 2 200 135 205 40 8703500 order request
4000 80 – 120 12 2 200 135 205 40 8704000 order request
4500 80 – 120 14 2 200 180 205 40 8704500 order request
5000 80 – 120 16 2 200 180 205 40 8705000 order request

Bolt-contacts from 5.000 up to 12.000 A feature about 3 rows of bolts and are available on request.